Lines Matching defs:support

982 	 * Add a zero-length attribute to tell the world we support
1073 * values allows us to support larger tape block sizes on some devices.
1737 * support for long format is mandatory but many drive don't do it.
1914 /* TLR support */
2453 * Since we have no idea how many densitiy support entries
2456 * entries by available density support length. If multiple
2509 * The tape drive may support many tape formats, but the st driver
2512 * last entry of density support data block descriptor.
2686 uchar_t support;
2708 support = ((struct one_com_des *)oper)->support;
2709 if ((support != SUPPORT_VALUES_SUPPORT_SCSI) &&
2710 (support != SUPPORT_VALUES_SUPPORT_VENDOR)) {
2731 * Timeout value in seconds is 4 bytes, but we only support the lower 2
3196 * mode. All drives are assumed to support fixed records.
4669 * be automaticly issued. If the drive support the long
5926 /* Load command to a drive that doesn't support load */
7960 * This device does not support data
7983 * This device does not support
10005 * most likely this is caused by flush-on-error support. If
13034 * dynamically turn off reserve/release support
13035 * in case of drives which do not support
13042 "Tape unit does not support "
13379 * If the device does support the TapeAlert log page, then the cleaning bit
13706 * Since this tape does not support Tape Alert,
13906 "Read Standard Inquiry for WORM support failed");
13911 /* This drive doesn't support it so don't check again */
13925 * If drive doesn't support it no point in checking further.
14000 "Read Standard Inquiry for WORM support failed");
14005 /* This drive doesn't support it so don't check again */
14019 * If drive doesn't support it no point in checking further.
14060 " WORM support failed %x", result);
14066 /* This drive doesn't support it so don't check again */
14158 * support thr read attributes command return error in the
14159 * hope that someday they will support the t10 method.
14209 "Read Vendor Specific Inquiry for WORM support failed");
17011 * if drive doesn't support read position we are done