Lines Matching refs:format
2566 * fmt - error string and format to be logged
2615 * fmt - info string and format to be logged
2665 * fmt - trace string and format to be logged
3289 * Description: This routine attempts to select descriptor sense format
3366 * Set D_SENSE to enable descriptor sense format.
3805 * For the improved format, where
3820 * For the old format, the structure of each duplet is as follows:
3904 * Decode the improved format sd-config-list.
3909 * The old format sd-config-list, loop through all
3977 * Description: Parse the improved format sd-config-list to get
4045 * format sd-config-list.
4654 * configuration table. Version 1 properties have the format:
6795 sd_pm_tran_data.format = DC_SMART_FORMAT;
6804 sd_pm_tran_data.format = DC_SCSI_FORMAT;
8001 * Enable descriptor format
11988 int format = 0;
12071 format = 1;
12121 if (format == 1) {
17729 * format.
17853 * fmt - SD_LOG_HEX (use 0x%02x format) or SD_LOG_CHAR (use %c)
17924 * This is based upon the size of the format string used.
18020 * Without the es_valid bit set (for fixed format) or an
18021 * information descriptor (for descriptor format) we cannot
18218 * in format without warning messages. We will log a message
18234 * can cause a long hang in format when the drive refuses to
18241 * results in a very long hang in format without
20624 * restart if format has been initiated.
27435 * Frame (MSF) format.
27506 * format.
27687 * format per the user) , track relative CD-ROM address (LBA or MSF
27688 * format per the user), control data and audio status.
27728 /* Set the MSF bit based on the user requested address format */
27736 * Set byte 3 to specify the return data format. A value of 0x01
27799 * fields, the starting address (LBA or MSF format per the user)
27809 * specifying the track # and the address format
27844 /* Validate the requested track and address format */
27858 /* Set the MSF bit based on the user requested address format */
27896 * Send a READ TOC command using the LBA address format to get
27901 * output format. The block address specified in that command
27902 * must be in LBA format.
27917 * Send a READ TOC command using the LBA address format to get
27922 * output format. The block address specified in that command
27923 * must be in LBA format.
28673 * the data starting address, transfer length, and format
30908 * format: fixed format, and descriptor format. At present, we
30909 * don't support descriptor format sense data for removable