Lines Matching refs:out
1402 goto out;
1415 goto out;
1421 goto out;
1427 goto out;
1494 out:
1829 "port %d satapkt 0x%p timed out\n",
1977 goto out;
2001 goto out;
2028 out:
2981 out:
3281 goto out;
3294 goto out;
3314 out:
4023 goto out;
4040 out:
4113 * software reset will get time out. So AHCI_CAP_INIT_PORT_RESET flag
4205 "capabilities pointer 0x%x out of range",
4424 out:
4451 #define READ_PMULT(addrp, r, pv, out) \
4453 goto out;
4455 #define WRITE_PMULT(addrp, r, v, out) \
4457 goto out;
4642 goto out;
4652 goto out;
4663 goto out;
4681 out:
4962 goto out;
4975 goto out;
4998 /* We are effectively timing out after 1 sec. */
5001 "SCLO time out. port %d is busy.", port);
5002 goto out;
5018 goto out;
5027 goto out;
5084 /* We are effectively timing out after 1 sec. */
5087 "the first SRST FIS is timed out, "
5089 goto out;
5144 /* We are effectively timing out after 1 sec. */
5147 "the second SRST FIS is timed out, "
5149 goto out;
5165 goto out;
5169 out:
5184 * normal out-of-band communication sequence defined in Serial ATA. At
5295 * We are effectively timing out after 0.1 sec.
5340 * We are effectively timing out after 11 sec.
5471 * We are effectively timing out after 0.1 sec.
5580 * the device through a COMRESET followed by the normal out-of-band
5621 "ahci hba reset is timing out, "
5623 /* We are effectively timing out after 1 sec. */
5976 * We are effectively timing out after 0.5 sec.
6738 * 3. DMA data-out command
6739 * 4. PIO data-out command
6742 * 7. PACKET PIO data-out command
6744 * 9. PACKET DMA data-out command
6823 goto out;
6835 /* READ PORTMULT need copy out FIS content. */
6845 goto out;
6851 goto out;
6932 out:
7081 goto out;
7101 out:
7180 * need to check GSCR[32] on the port multiplier to find out the
7517 * On device writes, the HBA will run out of data, and on reads, there
7665 goto out;
7677 out:
7717 * On device writes, the HBA will run out of data, and on reads, there
8098 * register to find out which port has pending interrupts. And then check
8099 * PxIS register to find out which interrupt events happened on that port.
8366 * We are effectively timing out after 0.5 sec.
8419 * PxIS.PRCS, which is the hot plug event. When the driver found out
8475 goto out;
8526 out:
8764 * 2. Timed out - timeout_tags includes its slot
9082 /* Timed out after 1s */
9092 * READ LOG EXT command gets a failure (fatal error or time-out).
9126 goto out;
9137 goto out;
9142 /* Fill out the error context */
9149 out:
9204 /* Timed out after 1s */
9214 * REQUEST SENSE command gets a faiure (fatal error or time-out).
9364 /* Fill out the status and error registers for PxIS.TFES */
9437 goto out;
9447 goto out;
9457 out:
9607 goto out;
9617 out:
9623 * detect there are some commands which are timed out.
9662 "timed out timeout_tags = 0x%x, slot_status = 0x%x, "
9811 * out.
9846 "port %d satapkt 0x%p timed out\n",