Cross Reference: /illumos-gate/usr/src/uts/common/io/nxge/nxge

Lines Matching refs:mode
143  * on N2-NIU systems in 10G mode, but it uses its own table
912 	/* Initialize XIF to configure a network mode */
1056 		    "nxge_xcvr_init: set ATCA mode"));
1141 			    "nxge_xif_init: Unknown port mode (%d)"
1146 		/* Enable ATCA mode */
1208 			/* Reset PCS multiple time in PORT_1G_TN1010 mode */
1535 		/* Set loopback mode if necessary */
1617 		/* Set loopback mode if necessary */
1815 		/* Set loopback mode if necessary */
1905 		/* Set loopback mode if necessary */
1922 		    "unsupported port mode %d",
1957 	/* 1G mode only write to the first channel */
2084 		/* Configure Serdes to 10G mode */
2120 		/* Configure Serdes to 10G mode */
2374 			/* Set pad loopback mode 0xaa */
2705 	/* Set BCM8704 Internal Loopback mode if necessary */
2839 	/* Set BCM8706 Internal Loopback mode if necessary */
3438 	/* Set loopback mode if required */
3558 		/* enable high power mode */
3563 		/* revert to low power mode */
3754 	/* Set internal loopback mode if necessary */
3888  * mode. So we can set it to either Dual Mode or 1G Only mode but
3889  * can't set it to 10G Only mode.
3940 	/* Whether we are in 1G or 10G mode, we always have the 1G capability */
4781 	    "nxge_link_intr: Failed to set port<%d> mif intr mode", portn));
4817 	 * The mif phy mode may be connected to either a copper link
4818 	 * or fiber link. Read the mode control register to get the fiber
5034 		NXGE_DEBUG_MSG((nxgep, MAC_CTL, "Going into forced mode."));
5093 				/* BCM5464R 1000mbps external loopback mode */
5110 				/* BCM5464R 100mbps external loopback mode */
5117 				/* BCM5464R 10mbps external loopback mode */
5356 	NXGE_DEBUG_MSG((nxgep, MAC_CTL, "Going into forced mode."));
5364 		/* BCM5464R 1000mbps external loopback mode */
6482 		 * nxge_xif_init which sets XGMII or GMII mode
6654 	/* Don't check link if we're in internal loopback mode */
6838 /* Set promiscous mode */
8112 			 * TODO 3 1G, 1 10G mode.
8121 			 * TODO 2 1G, 1 10G mode.
8130 			 * TODO 1 1G, 1 10G mode.
8407 			/* TODO 3 1G mode */
8412 			/* TODO 2 1G mode */
8429 			/* TODO 1 1G mode */
8529 	mii_mode_control_stat_t	mode;
8537 	mode.value = 0;
8538 	mode.bits.shadow = NXGE_MII_MODE_CONTROL_REG;
8542 	    mode.value)) != NXGE_OK) {
8547 	    mode.value)) != NXGE_OK) {
8554 	    &mode.value)) != NXGE_OK) {
8560 	    &mode.value)) != NXGE_OK) {
8565 	if (mode.bits.mode == NXGE_MODE_SELECT_FIBER) {
8568 		    "nxge_mii_get_link_mode: fiber mode"));
8573 	    "(address 0x%x) port 0x%x mode value 0x%x link mode 0x%x",
8575 	    mode.value, nxgep->mac.portmode));
8789 	mii_mode_control_stat_t	mode;
8852 	mode.value = 0;
8853 	mode.bits.shadow = NXGE_MII_MODE_CONTROL_REG;
8857 	    (uint8_t)(uint32_t)(&mii_regs->shadow), mode.value);
8860 	    (uint8_t)(uint32_t)(&mii_regs->shadow), &mode.value);
8863 	    (uint8_t)(uint64_t)(&mii_regs->shadow), mode.value);
8866 	    (uint8_t)(uint64_t)(&mii_regs->shadow), &mode.value);
8870 	    "nxge_mii_dump: mode control xcvr 0x%x value 0x%x",
8871 	    xcvr_portn, mode.value));