Lines Matching defs:device
271 * Figure out nxgep->mac.portmode from nxge.conf, OBP's device properties,
865 * Get the actual device ID value returned by MDIO read.
5522 * Perform write to Clause45 serdes / transceiver device
5528 * device: With each PHYAD, the driver can use MDIO to control
5529 * multiple devices inside the PHY, here "device" is an
5530 * MMD (MDIO managable device).
5531 * xcvr_reg: Each device has multiple registers. xcvr_reg specifies
5536 nxge_mdio_read(p_nxge_t nxgep, uint8_t xcvr_portn, uint8_t device,
5547 xcvr_portn, device, xcvr_reg, value)) != NPI_SUCCESS)
5564 /* Perform write to Clause45 serdes / transceiver device */
5567 nxge_mdio_write(p_nxge_t nxgep, uint8_t xcvr_portn, uint8_t device,
5578 xcvr_portn, device, xcvr_reg, value)) != NPI_SUCCESS)
5983 * Set new interface local address and re-init device.
5985 * to this device.
6456 * This is necessary only for the TN1010 basad device because only the
7728 * read and the PMA/PMD device ID and the PCS device ID using Clause 45 MDIO