Lines Matching refs:mode
57 # LOG_TGTM 0x00000800 /* FCP target mode events */
136 # 0 = attempt loop mode, if it fails attempt point-to-point mode
137 # 2 = attempt point-to-point mode only
138 # 4 = attempt loop mode only
139 # 6 = attempt point-to-point mode, if it fails attempt loop mode
141 # Set point-to-point mode if you want to run as an N_Port.
142 # Set loop mode if you want to run as an NL_Port.
270 # Requires SLI3 mode support in the adapter firmware.
279 # Requires SLI3 mode support in the adapter firmware.
294 # target-mode: Controls COMSTAR target mode support for an adapter port.
296 # 0 = Disables target mode support. Enables initiator mode support.
297 # 1 = Enables target mode support. Disables initiator mode support.
300 # target-mode=1; Sets global default for target mode
301 # emlxs0-target-mode=0; emlxs0 will be an initiator port
302 # emlxs1-target-mode=1; emlxs1 will be a target port
306 target-mode=0;
314 # This parameter is required if you enable target-mode.
315 # If target mode is enabled the emlxs driver MUST be force attached
321 # *Uncomment this parameter when target-mode is enabled
326 # This should ONLY be used if target-mode is enabled
347 # This should ONLY be used if target-mode is enabled