Cross Reference: /illumos-gate/usr/src/uts/common/io/e1000api/e1000

Lines Matching refs:DEBUGOUT
378 	DEBUGOUT("Programming MAC Address into RAR[0]\n");
426 		DEBUGOUT("NVM Read Error\n");
446 			DEBUGOUT("NVM Read Error\n");
456 		DEBUGOUT("Ignoring Alternate Mac Address with MC bit set\n");
762 		DEBUGOUT("Error configuring flow control\n");
802 		DEBUGOUT("NOT Rx'ing /C/, disable AutoNeg and force link.\n");
815 			DEBUGOUT("Error configuring flow control\n");
824 		DEBUGOUT("Rx'ing /C/, enable AutoNeg and stop forcing link.\n");
867 		DEBUGOUT("NOT Rx'ing /C/, disable AutoNeg and force link.\n");
880 			DEBUGOUT("Error configuring flow control\n");
889 		DEBUGOUT("Rx'ing /C/, enable AutoNeg and stop forcing link.\n");
905 				DEBUGOUT("SERDES: Link up - forced.\n");
909 			DEBUGOUT("SERDES: Link down - force failed.\n");
922 					DEBUGOUT("SERDES: Link up - autoneg completed successfully.\n");
925 					DEBUGOUT("SERDES: Link down - invalid codewords detected in autoneg.\n");
929 				DEBUGOUT("SERDES: Link down - no sync.\n");
933 			DEBUGOUT("SERDES: Link down - autoneg failed\n");
977 		DEBUGOUT("NVM Read Error\n");
1041 	DEBUGOUT("Initializing the Flow Control address, type and timer regs\n");
1109 		DEBUGOUT("Flow control param set incorrectly\n");
1148 		DEBUGOUT("Never got a valid link from auto-neg!!!\n");
1157 			DEBUGOUT("Error while checking for link\n");
1163 		DEBUGOUT("Valid Link Found\n");
1200 	DEBUGOUT("Auto-negotiation enabled\n");
1214 		DEBUGOUT("No signal detected\n");
1332 		DEBUGOUT("Flow control param set incorrectly\n");
1375 		DEBUGOUT("Error forcing flow control settings\n");
1397 			DEBUGOUT("Copper PHY and Auto Neg has not completed.\n");
1459 				DEBUGOUT("Flow Control = FULL.\n");
1462 				DEBUGOUT("Flow Control = Rx PAUSE frames only.\n");
1477 			DEBUGOUT("Flow Control = Tx PAUSE frames only.\n");
1491 			DEBUGOUT("Flow Control = Rx PAUSE frames only.\n");
1497 			DEBUGOUT("Flow Control = NONE.\n");
1506 			DEBUGOUT("Error getting link speed and duplex\n");
1518 			DEBUGOUT("Error forcing flow control settings\n");
1536 			DEBUGOUT("PCS Auto Neg has not completed.\n");
1592 				DEBUGOUT("Flow Control = FULL.\n");
1595 				DEBUGOUT("Flow Control = Rx PAUSE frames only.\n");
1610 			DEBUGOUT("Flow Control = Tx PAUSE frames only.\n");
1624 			DEBUGOUT("Flow Control = Rx PAUSE frames only.\n");
1630 			DEBUGOUT("Flow Control = NONE.\n");
1642 			DEBUGOUT("Error forcing flow control settings\n");
1669 		DEBUGOUT("1000 Mbs, ");
1672 		DEBUGOUT("100 Mbs, ");
1675 		DEBUGOUT("10 Mbs, ");
1680 		DEBUGOUT("Full Duplex\n");
1683 		DEBUGOUT("Half Duplex\n");
1734 		DEBUGOUT("Driver can't access device - SMBI bit is set.\n");
1753 		DEBUGOUT("Driver can't access the NVM\n");
1799 		DEBUGOUT("Auto read by HW from NVM has not completed.\n");
1822 		DEBUGOUT("NVM Read Error\n");
2109 		DEBUGOUT("Master requests are pending.\n");
2129 		DEBUGOUT("Not in Adaptive IFS mode!\n");
2157 		DEBUGOUT("Not in Adaptive IFS mode!\n");
2196 		DEBUGOUT("Invalid MDI setting detected\n");