build-sys: move coredump logic into subdir of its own

build-sys: add missing makefile symlink

build-sys: add missing Makefile symlink

sd-netlink: rename from sd-rtnl

build-sys: split internal basic/ library from shared/ basic/ can be used by everything cannot use anything outside of basic/ libsystemd/ can use basic/ cannot use shared/ shared/ can use libsystemd/

build-sys: add one more Makefile symlink

user-sessions: move into own subdir and build independently of logind Suggested by Zbyszek on IRC. [zj: /run/nologin is used with PAM. systemd-user-session is independent of logind.]

build-sys: add two more missing makefile links

sysv-generator: properly add Makefile symlink

import: add new minimal tool "systemd-import" for pulling down foreign containers and install them locally This adds a simply but powerful tool for downloading container images from the most popular container solution used today. Use it like this: # systemd-import pull-dck mattdm/fedora # systemd-nspawn -M fedora This will donwload the layers for "mattdm/fedora", and make them available locally as /var/lib/container/fedora. The tool is pretty complete, as long as it's only about pulling down images, or updating them. Pushing or searching is not supported yet.

systemd-hwdb: introduce new tool This pulls out the hwdb managment from udevadm into an independent tool. The old code is left in place for backwards compatibility, and easy of testing, but all documentation is dropped to encourage use of the new tool instead.

libsystemd: add sd-hwdb library This is libudev-hwdb, but decoupled from libudev and in the libsystemd style. The core code is unchanged, apart from the following minor changes: - hwdb.bin located in /**/systemd/hwdb/ take preference over the ones located in /**/udev/ - properties are stored internally in an OrderedHashmap, rather than a linked list. - a new API call allows individual properties to be queried directly, rather than iterating over them all - the iteration over properties have been moved inside the library, rather than exposing a list directly - the unused 'flags' parameter was dropped

hibernate-resume: add a tool to write a device node's major:minor to /sys/power/resume. This can be used to initiate a resume from hibernation by path to a swap device containing the hibernation image. The respective templated unit is also added. It is instantiated using path to the desired resume device.

sd-network: move sd-network API into libsystemd proper In contrast to the DHCP/IPv4LL/ICMP6 APIs sd-network is not a protocol implementation but a client API for networkd, hence move it into libsystemd proper.

build-sys: add missing makefile symlinks

Move network-related journal programs to src/journal-remote/ Directory src/journal has become one of the largest directories, and since systemd-journal-gatewayd, systemd-journal-remote, and forthcoming systemd-journal-upload are all closely related, create a separate directory for them.

resolved: add small NSS module that uses resolved to resolve DNS names

nss-mymachines: add new NSS module for automatically resolving addresses of all local containers

escape: beef up new systemd-escape tool Add various options for making it easy unescape, or mangle, or format as template instance or append a suffix.

firstboot: add new component to query basic system settings on first boot, or when creating OS images offline A new tool "systemd-firstboot" can be used either interactively on boot, where it will query basic locale, timezone, hostname, root password information and set it. Or it can be used non-interactively from the command line when prepareing disk images for booting. When used non-inertactively the tool can either copy settings from the host, or take settings on the command line. $ systemd-firstboot --root=/path/to/my/new/root --copy-locale --copy-root-password --hostname=waldi The tool will be automatically invoked (interactively) now on first boot if /etc is found unpopulated. This also creates the infrastructure for generators to be notified via an environment variable whether they are running on the first boot, or not.

path: add new "systemd-path" utility for querying paths described in file-hierarchy(7) This new tool is based on "sd-path", a new (so far unexported) API for libsystemd, that can hopefully grow into a workable API covering /opt and more one day.

build-sys: add missing Makefile symlink

debug-generator: add new generator debug-generator can mask specific units if they are specified on the kernel command line with systemd.mask=. debug-generator can pull in debug-shell.service is systemd.debug-shell is passed on the kernel command line.

preset: ship a minimal preset file upstream This is useful so that distros have something to base their own policy of. It also useful to make sure that minimal installs always get useful configuration in place.

build-sys: add missing Makefile link

update-done: add minimal tool to manage system updates for /etc and /var, if /usr has changed In order to support offline updates to /usr, we need to be able to run certain tasks on next boot-up to bring /etc and /var in line with the updated /usr. Hence, let's devise a mechanism how we can detect whether /etc or /var are not up-to-date with /usr anymore: we keep "touch files" in /etc/.updated and /var/.updated that are mtime-compared with /usr. This means: Whenever the vendor OS tree in /usr is updated, and any services that shall be executed at next boot shall be triggered, it is sufficient to update the mtime of /usr itself. At next boot, if /etc/.updated and/or /var/.updated is older than than /usr (or missing), we know we have to run the update tools once. After that is completed we need to update the mtime of these files to the one of /usr, to keep track that we made the necessary updates, and won't repeat them on next reboot. A subsequent commit adds a new ConditionNeedsUpdate= condition that allows checking on boot whether /etc or /var are outdated and need updating. This is an early step to allow booting up with an empty /etc, with automatic rebuilding of the necessary cache files or user databases therein, as well as supporting later updates of /usr that then propagate to /etc and /var again.

sysusers: add minimal tool to reconstruct /etc/passwd and /etc/group from static files systemd-sysusers is a tool to reconstruct /etc/passwd and /etc/group from static definition files that take a lot of inspiration from tmpfiles snippets. These snippets should carry information about system users only. To make sure it is not misused for normal users these snippets only allow configuring UID and gecos field for each user, but do not allow configuration of the home directory or shell, which is necessary for real login users. The purpose of this tool is to enable state-less systems that can populate /etc with the minimal files necessary, solely from static data in /usr. systemd-sysuser is additive only, and will never override existing users. This tool will create these files directly, and not via some user database abtsraction layer. This is appropriate as this tool is supposed to run really early at boot, and is only useful for creating system users, and system users cannot be stored in remote databases anyway. The tool is also useful to be invoked from RPM scriptlets, instead of useradd. This allows moving from imperative user descriptions in RPM to declarative descriptions. The UID/GID for a user/group to be created can either be chosen dynamic, or fixed, or be read from the owner of a file in the file system, in order to support reconstructing the correct IDs for files that shall be owned by them. This also adds a minimal user definition file, that should be sufficient for most basic systems. Distributions are expected to patch these files and augment the contents, for example with fixed UIDs for the users where that's necessary.

Move handling of sysv initscripts to a generator Reuses logic from service.c and the rc-local generator. Note that this drops reading of chkconfig entirely. It also drops reading runlevels from the LSB headers. The runlevels were only used to check for runlevels outside of the normal 1-5 range and then add special dependencies and settings. Special runlevels were dropped in the past so it seemed to be unused code. The generator does not know about non-generated units with a value set with SysVStartPriority=. These are therefor not taken into account when converting start priority to before/after.

resolved: add daemon to manage resolv.conf Also remove the equivalent functionality from networkd.

timesyncd: read server settings from a configuration file Also, allow compiling in a default server list via a configure command line item.

build-sys: add Makefile symlink

build-sys: add makefile link

sd-network: add new library This is similar to sd-login, but exposes the state of networkd rather than logind. Include it in libsystemd-dhcp and rename it to libsystemd-network.

build-sys: add missing makefile symlinks

build-sys: merge libsystemd-id128 into libsystemd

libsystemd: split up into subdirs We still only produce on .so, but let's keep the sources separate to make things a bit less messy.

libsystemd-bus: rename to libsystemd Documentation was updated to refer to either 'libsystemd' or 'sd-bus' in place of libsystemd-bus.

bus: add generator that turns old dbus1 activation files into .busname + .service units

rename stdio-bridge to bus-proxyd

networkd: add a basic network daemon This daemon listens for and configures network devices tagged with 'systemd-networkd'. By default, no devices are tagged so this daemon can safely run in parallel with existing network daemons/scripts. Networks are configured in /etc/systemd/network/*.network. The first .network file that matches a given link is applied. The matching logic is similar to the one for .link files, but additionally supports matching on interface name. The mid-term aim is to provide an alternative to ad-hoc scripts currently used in initrd's and for wired setups that don't change much (e.g., as seen on servers/and some embedded systems). Currently, static addresses and a gateway can be configured. Example .network file: [Match] Name=wlp2s0 [Network] Description=My Network Gateway=192.168.1.1 Address=192.168.1.23/24 Address=fe80::9aee:94ff:fe3f:c618/64

build-sys: add Makefile symlink for src/activate/

udev: add network link configuration tool This tool applies hardware specific settings to network devices before they are announced via libudev. Settings that will probably eventually be supported are MTU, Speed, DuplexMode, WakeOnLan, MACAddress, MACAddressPolicy (e.g., 'hardware', 'synthetic' or 'random'), Name and NamePolicy (replacing our current interface naming logic). This patch only introduces support for Description, as a proof of concept. Some of these settings may later be overriden by a network management daemon/script. However, these tools should always listen and wait on libudev before touching a device (listening on netlink is not enough). This is no different from how things used to be, as we always supported changing the network interface name from udev rules, which does not work if someone has already started using it. The tool is configured by .link files in /etc/net/links/ (with the usual overriding logic in /run and /lib). The first (in lexicographical order) matching .link file is applied to a given device, and all others are ignored. The .link files contain a [Match] section with (currently) the keys MACAddress, Driver, Type (see DEVTYPE in udevadm info) and Path (this matches on the stable device path as exposed as ID_PATH, and not the unstable DEVPATH). A .link file matches a given device if all of the specified keys do. Currently the keys are treated as plain strings, but some limited globbing may later be added to the keys where it makes sense. Example: /etc/net/links/50-wireless.link [Match] MACAddress=98:f2:e4:42:c6:92 Path=pci-0000:02:00.0-bcma-0 Type=wlan [Link] Description=The wireless link

socket-proxyd: rename from saproxy The thing is a daemon, hence needs a "d" prefix. Also, we tend to not abbreviate names of background components unnecessarily, since they are not primary commands people type. Then, the fact that this thing does socket actviation is mostly in implementationd detail for the proxy. Also, do some minor indenting clean-ups and other code updates.

rfkill: add new rfkill tool to save/restore rfkill state across reboots This works analogous to the existing backlight and random seed services

backlight: add minimal tool to save/restore screen brightness across reboots As many laptops don't save/restore screen brightness across reboots, let's do this in systemd with a minimal tool, that restores the brightness as early as possible, and saves it as late as possible. This will cover consoles and graphical logins, but graphical desktops should do their own per-user stuff probably. This only touches firmware brightness controls for now.

build-sys: add two makefile symlinks

machined: split out machine registration stuff from logind Embedded folks don't need the machine registration stuff, hence it's nice to make this optional. Also, I'd expect that machinectl will grow additional commands quickly, for example to join existing containers and suchlike, hence it's better keeping that separate from loginctl.

core: add transient units Transient units can be created via the bus API. They are configured via the method call parameters rather than on-disk files. They are subject to normal GC. Transient units currently may only be created for services (however, we will extend this), and currently only ExecStart= and the cgroup parameters can be configured (also to be extended). Transient units require a unique name, that previously had no configuration file on disk. A tool systemd-run is added that makes use of this functionality to run arbitrary command lines as transient services: $ systemd-run /bin/ping www.heise.de Will cause systemd to create a new transient service and run ping in it.

build-sys: add makefile stub link to nss-myhostname/

boot: add stub Makefile symlink

build-sys: add makefile to bootchart

build-sys: add symlink Makefile to catalog/ too

docs: install README files into /var/log and 7etc/rc.d/init.d On systemd systems seasoned admins might be surprised to see that the init scripts and log files are gone. To ease the transition let's place some README files there, that hopefully help clearing up the situation.

system-update: add system update generator http://freedesktop.org/wiki/Software/systemd/SystemUpdates

mount: replace PID1 internal fstab parser with generator Bit by bit we should remove non-unit parsing from PID 1 and move into generators, to clean up our code base a bit and clearly separate parsers.

delta: add missing files

sleep: implement suspend/hibernate as first class targets

remount: consolidate remount-api-vfs and remount-rootfs into one This has the advantage of removing a confusing warning by mount if the root directory is not listed in fstab.

build-sys: add stub makefiles to all subdirs to ease development with emacs

machine-id-setup: add the usual command line parameters

test: test tools should still be in the src/ directory

build-sys: add stub makefiles to make emacs easier to use

relicense to LGPLv2.1 (with exceptions) We finally got the OK from all contributors with non-trivial commits to relicense systemd from GPL2+ to LGPL2.1+. Some udev bits continue to be GPL2+ for now, but we are looking into relicensing them too, to allow free copy/paste of all code within systemd. The bits that used to be MIT continue to be MIT. The big benefit of the relicensing is that closed source code may now link against libsystemd-login.so and friends.

journal: hook up coredumping with journal

build-sys: add stub makefiles to subdirs

logind: move logind into its own subdirectory

journal: add preliminary incomplete implementation

drop support for MANAGER_SESSION, introduce MANAGER_USER instead

build-sys: add small redirecting Makefiles to simplify compilation from within emacs