tree-wide: remove Emacs lines from all files This should be handled fine now by .dir-locals.el, so need to carry that stuff in every file.

tree-wide: sort includes in *.h This is a continuation of the previous include sort patch, which only sorted for .c files.

sd-dhcp6-client: bind to link-local address This ensures that several DHCPv6 clients can run on separate interfaces simultaneously.

networkd: link - track state of IPv6LL address This is managed by the kernel, but we should track whether or not we have a configured IPv6LL address. This fixes two issues: - we now wait for IPv6LL before considering the link ready - we now wait for IPv6LL before attempting to do NDisc or DHCPv6 these protocols relies on an LL address being available.

networkd: ndisc - handle router advertisement in userspace Router Discovery is a core part of IPv6, which by default is handled by the kernel. However, the kernel implementation is meant as a fall-back, and to fully support the protocol a userspace implementation is desired. The protocol essentially listens for Router Advertisement packets from routers on the local link and use these to configure the client automatically. The four main pieces of information are: what kind (if any) of DHCPv6 configuration should be performed; a default gateway; the prefixes that should be considered to be on the local link; and the prefixes with which we can preform SLAAC in order to pick a global IPv6 address. A lot of additional information is also available, which we do not yet fully support, but which will eventually allow us to avoid the need for DHCPv6 in the common case. Short-term, the reason for wanting this is in userspace was the desire to fully track all the addresses on links we manage, and that is not possible for addresses managed by the kernel (as the kernel does not expose to us the fact that it manages these addresses). Moreover, we would like to support stable privacy addresses, which will soon be mandated and the legacy MAC-based global addresses deprecated, to do this well we need to handle the generation in userspace. Lastly, more long-term we wish to support more RA options than what the kernel exposes.

networkd: IPv6 router discovery - follow IPv6AcceptRouterAdvertisemnt= The previous behavior: When DHCPv6 was enabled, router discover was performed first, and then DHCPv6 was enabled only if the relevant flags were passed in the Router Advertisement message. Moreover, router discovery was performed even if AcceptRouterAdvertisements=false, moreover, even if router advertisements were accepted (by the kernel) the flags indicating that DHCPv6 should be performed were ignored. New behavior: If RouterAdvertisements are accepted, and either no routers are found, or an advertisement is received indicating DHCPv6 should be performed, the DHCPv6 client is started. Moreover, the DHCP option now truly enables the DHCPv6 client regardless of router discovery (though it will probably not be very useful to get a lease withotu any routes, this seems the more consistent approach). The recommended default setting should be to set DHCP=ipv4 and to leave IPv6AcceptRouterAdvertisements unset.

networkd: dhcp6 - split up configure() method Enabling address acquisition, configuring the client and starting the client are now split out. This to better handle the client being repeatedly enabled due to router advertisements.

networkd: route - track routes

util-lib: split our string related calls from util.[ch] into its own file string-util.[ch] There are more than enough calls doing string manipulations to deserve its own files, hence do something about it. This patch also sorts the #include blocks of all files that needed to be updated, according to the sorting suggestions from CODING_STYLE. Since pretty much every file needs our string manipulation functions this effectively means that most files have sorted #include blocks now. Also touches a few unrelated include files.

networkd: dhcp6 - do not handle prefix expiration This ressurects 47d45d3cde45d6545367570264e4e3636bc9e345. We now always use /128 prefixes, so there is no need for the DHCPv6 code to know about prefixes expiring.

networkd: ndisc - split out from dhcp6 code

networkd: rename icmp6 to ndisc

sd-ndisc: rename API from sd-icmp6-nd

sd-icmp6-nd: rename files to sd-ndisc The actual code rename will follow. The reason for the change of name is to make it simpler and more uniform with how we name other libraries (we don't include the underlying protocol). The new name also matches the naming in the kernel (which is particularly relevent here as we expect to let the kernel do some parts of the protocol and we do others).

networkd: manager/link - only serialize once per event-loop iteration Every time the state is written out we may trigger third-party apps, so let's be a bit more careful about writing this out unnecessarily.

networkd: address - distinguish between addresses added by us and by others We only keep the addresses that we added ourselves in link->addresses, and introduce a new set link->addresses_foreign to keep addresses of unknown origin. Only functional change is that "foreign" addresses no longer prevent a link from entering "configured" state.

networkd: link - only consider configured when all addresses are ready We were considering a link configured whilst its IPv6 addresses were still tentative. Fixes issue #650.

networkd: make address_{establish,release}() static No need to expose these functions, but rather call them from address_{add,drop}.

networkd: address - store active addresses in a Set rather than a List We need to be able to look these things up quickly as we will be updating them continuously and there can in principle be many of them.

networkd: address - process in manager.c rather than link.c

networkd: Wait for DHCPv6 before announcing link configured Wait until DHCPv6 has acquired an address before announcing the link to be configured. Log the DHCPv6 lease lost event.

networkd: split up networkd.h into per-object header files No functional changes, just moving definitions into separate header files.

networkd: optionally push dhcp timezone into timedated

sd-netlink: rename from sd-rtnl

core,network: major per-object logging rework This changes log_unit_info() (and friends) to take a real Unit* object insted of just a unit name as parameter. The call will now prefix all logged messages with the unit name, thus allowing the unit name to be dropped from the various passed romat strings, simplifying invocations drastically, and unifying log output across messages. Also, UNIT= vs. USER_UNIT= is now derived from the Manager object attached to the Unit object, instead of getpid(). This has the benefit of correcting the field for --test runs. Also contains a couple of other logging improvements: - Drops a couple of strerror() invocations in favour of using %m. - Not only .mount units now warn if a symlinks exist for the mount point already, .automount units do that too, now. - A few invocations of log_struct() that didn't actually pass any additional structured data have been replaced by simpler invocations of log_unit_info() and friends. - For structured data a new LOG_UNIT_MESSAGE() macro has been added, that works like LOG_MESSAGE() but prefixes the message with the unit name. Similar, there's now LOG_LINK_MESSAGE() and LOG_NETDEV_MESSAGE(). - For structured data new LOG_UNIT_ID(), LOG_LINK_INTERFACE(), LOG_NETDEV_INTERFACE() macros have been added that generate the necessary per object fields. The old log_unit_struct() call has been removed in favour of these new macros used in raw log_struct() invocations. In addition to removing one more function call this allows generated structured log messages that contain two object fields, as necessary for example for network interfaces that are joined into another network interface, and whose messages shall be indexed by both. - The LOG_ERRNO() macro has been removed, in favour of log_struct_errno(). The latter has the benefit of ensuring that %m in format strings is properly resolved to the specified error number. - A number of logging messages have been converted to use log_unit_info() instead of log_info() - The client code in sysv-generator no longer #includes core code from src/core/. - log_unit_full_errno() has been removed, log_unit_full() instead takes an errno now, too. - log_unit_info(), log_link_info(), log_netdev_info() and friends, now avoid double evaluation of their parameters

network: Implement fallback DHCPv6 prefix handling for older kernels When setting IPv6 addresses acquired by DHCPv6, systemd-networkd sets the IFA_F_NOPREFIXROUTE flag in the IFA_FLAGS netlink attribute. As the flag and the attribute are present starting with Linux 3.14, older kernels will need systemd-network to manage prefix route expiry. By default, DHCPv6 addresses are first assigned setting the IFA_F_NOPREFIXROUTE flag in the IFA_FLAGS netlink attribute. Should the address assignment fail, the same assignment is tried without the IFA_FLAGS attribute. Should also the second attempt fail, an error is printed and address assignment ends with failure. As successful use of the IFA_FLAGS netlink attribute is recorded in the Link structure, the DHCPv6 code will know if the kernel or systemd-network fallback code handles expiring prefixes. The prefix expiration and IPv6 address updating fallback code is resurrected from the parts deleted with commit 47d45d3cde45d6545367570264e4e3636bc9e345. This patch can be removed once the minimum kernel requirements are greater than or equal to 3.14.

networkd: add support for Uplink Failure Detection Introduce BindCarrier= to indicate the set of links that determine if the current link should be brought UP or DOWN. [tomegun: add a bit to commit message]

networkd DHCPv4 logging endian fix On Tue, Feb 10, 2015 at 08:10:43PM +0100, Lennart Poettering wrote: > Hmm, I think it would be nicer to use be32toh() here instead, since it > ensures the macro is (to a limited degree) typesafe. > > Any chance you could rework that? From: Paul Martin <paul.martin@codethink.co.uk> Date: Wed, 11 Feb 2015 11:47:16 +0000 Subject: [PATCH] networkd dhcpv4 logging endian fix On a big-endian host, systemd-networkd prints out IPv4 network addresses byte reversed: Feb 10 16:43:32 hostname systemd-networkd[151]: eth0 : DHCPv4 address 158.1.24.10/16 via 1.1.24.10 The address obtained is 10.24.1.158/16 and the route is 10.24.0.0/16 dev eth0 src 10.24.1.187 The macro ADDRESS_FMT_VAL() unpacks a "struct in_addr" in a little-endian specific manner. This patch forces the passed address into host order, then unpacks it. On an x86 later than i486, compiled with -O2, the only extra overhead is a single bswap instruction.

networkd: generalize IPv4LL to LinkLocal This allows both IPv4 and IPv6 link-local addresses to be enabled or disabled. By default we still enable IPv6LL and disable IPv4LL. The old config option is kept for backwards compatibility, but removed from the documentation.

networkd: exit on idle We will be woken up on rtnl or dbus activity, so let's just quit if some time has passed and that is the only thing that can happen. Note that we will always stay around if we expect network activity (e.g. DHCP is enabled), as we are not restarted on that.

networkd: add basic dbus API Only the very basics, more to come. For now: $ busctl tree org.freedesktop.network1 └─/org/freedesktop/network1 └─/org/freedesktop/network1/link ├─/org/freedesktop/network1/link/1 ├─/org/freedesktop/network1/link/2 ├─/org/freedesktop/network1/link/3 ├─/org/freedesktop/network1/link/4 ├─/org/freedesktop/network1/link/5 ├─/org/freedesktop/network1/link/6 ├─/org/freedesktop/network1/link/7 ├─/org/freedesktop/network1/link/8 └─/org/freedesktop/network1/link/9 $ busctl introspect org.freedesktop.network1 /org/freedesktop/network1 NAME TYPE SIGNATURE RESULT/VALUE FLAGS org.freedesktop.network1.Manager interface - - - .OperationalState property s "carrier" emits-change $ busctl introspect org.freedesktop.network1 /org/freedesktop/network1/link/1 NAME TYPE SIGNATURE RESULT/VALUE FLAGS org.freedesktop.network1.Link interface - - - .AdministrativeState property s "unmanaged" emits-change .OperationalState property s "carrier" emits-change

networkd: handle suspend events

LLDP: Add support for networkctl

networkd: integrate LLDP This patch integrates LLDP with networkd. Example conf: file : lldp.network [Match] Name=em1 [Network] LLDP=yes

networkd-dhcp6: Move ICMPv6 and DHCPv6 configuration to new file Handle all aspects of ICMPv6 and DHCPv6 in a file of its own as is done with DHCPv4 and IPv4LL.

networkd: manager - enumerate addresses globally, rather than per-link The kernel always returns all addresses, rather than only for the given link, so let's only enumerate once.

networkd: update logging macros for parameter order, and errno, to match rest of the code

log: rearrange log function naming - Rename log_meta() → log_internal(), to follow naming scheme of most other log functions that are usually invoked through macros, but never directly. - Rename log_info_object() to log_object_info(), simply because the object should be before any other parameters, to follow OO-style programming style.

log: add an "error" parameter to all low-level logging calls and intrdouce log_error_errno() as log calls that take error numbers This change has two benefits: - The format string %m will now resolve to the specified error (or to errno if the specified error is 0. This allows getting rid of a ton of strerror() invocations, a function that is not thread-safe. - The specified error can be passed to the journal in the ERRNO= field. Now of course, we just need somebody to convert all cases of this: log_error("Something happened: %s", strerror(-r)); into thus: log_error_errno(-r, "Something happened: %m");

networkd: move carrier gained/lost handling from link_update_flags() to link_update() This allows us also to simplify link_has_carrier() a bit.

sd-network: rename operstates 'down' -> 'off' and 'up' -> 'no-carrier' Suggested by Lennart and Kay.

sd-network: rename state INITALIZING to PENDING and expose as any other state This is the state when we are waiting for udev to initialize the device, and waiting for libudev and rtnl to be in sync. In the future we probably will also be waiting for nl80211. At this point we do not yet have enough information to know whether or not networkd should be handling the device.

sd-network: split the operstate 'unknown' into 'down' and 'up'

networkd: link - split out dhcp4 handling

networkd: link - split out ipv4ll handling

networkd: split out networkd-link.h